If the times come talk to about features and capabilities, Cisco router is a renowned name transmits highly secure networking data, based on adaptive and open technologies. This brand router is helpful to make simpler your business networking setup and make a smooth and secure connection between the Internet and your local area network (LAN). In addition, to serve as a basic gateway to the Internet, it also works as an FTP server. When the server is turned on, you will be able to transfer files on the router directly whether you are connected to the LAN side via an FTP client or connected via a terminal.
However, if you are having any concerns or problems related to the router functionality, contact directly to the expert by dialing Cisco customer service number for further solutions. The following below-listed steps will let you how to activate the FTP (File Transfer Protocol) on the Cisco Router. Here’s know how to do:
Step 1: Connect to the Cisco router via a Telnet client. Enter the IP address of the Cisco router like as the host name for the Telnet network connection, then click on the client ‘Connect’ button. You can also navigate to the router’s documentation to find the address.
Step 2: Enter your router’s password once asked to do so in order to complete the connection setup, and get access to the router’s controls along with the terminal program.
Step 3: Enter the ‘ftp-server enable’ on the terminal’s command line, and then press the ‘Enter’ key to activate server capability.
Step 4: Enter the ‘ftp-server top dir <directory>’ on the next terminal route, exchanging the directory name for the FTP files on behalf of <directory> to bound FTP access to that particular directory only.
Step 5: It will stop unauthorized access to your network or the router. Press the ‘Enter’ key to put the command into your router.
Step 2: Enter your router’s password once asked to do so in order to complete the connection setup, and get access to the router’s controls along with the terminal program.
Step 3: Enter the ‘ftp-server enable’ on the terminal’s command line, and then press the ‘Enter’ key to activate server capability.
Step 4: Enter the ‘ftp-server top dir <directory>’ on the next terminal route, exchanging the directory name for the FTP files on behalf of <directory> to bound FTP access to that particular directory only.
Step 5: It will stop unauthorized access to your network or the router. Press the ‘Enter’ key to put the command into your router.
Now, you will be able to access to the secured network connection and transfer your files under the supervision of FTP server. However, if you might face any problem when you turn on FTP on your router, contacting the Cisco tech support phone number is a good solution you can avail to fix the FTP issue instantly related to the Cisco router, or other technical problems.
