5 Easy Fixes For Limited Connection Problems With TP-Link Routers

TP-link routers can be used for both wireless and wired internet connectivity in your home and office. Many computers, laptops, tablets and mobile phones can share the one network connection. However, users may experience problems at times while they use their TP-link routers for wireless bridging, such as no Internet connection, limited connectivity, not being able to access the Internet or your router turning off unexpected. In most situations, a bit of troubleshooting with the help of experts at TP-link support phone number, can get your wireless router back up and work. Here’s how to fix:

Causes and Solutions:

Solution #1: The Internet connection can be disconnected from the AP or modem due to the ISP issues. If you see the ‘Limited’ or ‘No Connection’ issues, then first check whether you’re connected directly or via the TP-Link router. Wait for a while to see if the connection returns back on its own. If it doesn’t, then restart the modem and try again to fix the problem. However, if the issue still continues, contact your ISP.  If you can access the Internet with AP/Modem, then you should try to troubleshoot your router for issues.

Solution #2: If your TP-Link router is connected via LAN, check that the cables are attached correctly, and connections aren’t broken or loose. If you have a Wireless WAN connection, ensure that the router is put in a place where it’s getting adequate signals. If it’s not, then you may not be able to access the Internet. So change your router’s location and try again to connect. 

Solution #3: If you’re using your TP-Link router for Wi-Fi bridging, check that you have used the same password and channel as an Access Point or your modem.  Using a different channel number or password will result in a limited connectivity or no connection issue. So, check the Repeater/WDS bridge configuration and make sure that these two have similar ones with the Access Point or Wi-Fi Modem settings. Using a different SSIS doesn’t matter in this circumstance. 

Solution #4: If you’re using your router as a repeater, WDS bridge, repeater or to share multiple systems over LAN and having limited or no internet connection issues, then there are possibilities that DHCP is sourcing IP conflicts and it’s failing to provide the IP address. Also, you may face such problems due to a firmware hiccup or incompatibility between associated devices. In such a situation, often, turning off DHCP solves the limited or no Internet connectivity problems. 

Solution #5: If you have done everything to fix the connection issue, and still the problem exists, there might be problems related to your device hardware. In fact, in such cases, you should contact the customer support by dialing the TP-link router customer service phone number for further assistance.

How to Show IP Routing Table on Cisco Router

Cisco routers run on their own IOS (Internetwork operating system) operating system. When configuring these routers, it’s important to have knowledge of the CLI (command line interface) to users, which includes a number of commands, depending on your router model and the user privilege level. These commands let the user perform different operations necessary for the configuration of the router and to make it secure from several vulnerabilities.

Besides, due to the proficiency of Cisco IOS, it has been copied by the other router’s manufacturers. If you want to test the routing table on your router, the process is quite easy and straightforward; still, you can acquire the support of professionals by calling at the Cisco customer support number to complete the process in a hassle-free manner. Here’s how to check: 

Setting Up Your Computer 

• First of all, connect your PC using the COM port to the router’s console port via the serial cable. 
• Open the HyperTerminal tool. If you have Windows Vista or 7, you can’t access it directly, and you need to download the tool manually. 
• Change your HyperTerminal configuration to the correct COM port, and set the connection speed up to 9600 baud.

Connecting to Cisco Router

• Start your Cisco router if it’s not yet turned on. If it prompts you to complete the initial settings, then click the ‘No’ button. 
• In the prompt window, input the word, which can be either router name or the model of the router. Also, you need to enter the password in the enable mode. Enter the password if it’s necessary. The CLI will change the router settings and set it to the enable mode. 
• Enter the ‘show IP route’ text in the command line window. It will now display the IP routing table.

However, if you are not familiar with the router functionality and don’t know how to use the Cisco router to show IP routing table, then you can call at the Cisco router tech support phone number to get the guidance of technical specialists. Additionally, you can also verify the Cisco IP routing table to troubleshoot the related problems. Whatever problems you have with your router, just call on the same number for identifying and remediation problems.

Netgear wireless adapter not working with Windows 10

Some Windows 10 users still have reported that they won’t be able to connect to the Internet using the Netgear wireless adapter. Although the adapter functions well while starting the PC and connecting it to the Internet, but after some time the internet drops down frequently and the only method to access it is to disconnect and reconnect the adapter. Such situation can be quite frustrating and can disrupt your work as you’re left with the unstable network connection; however, there are few things you can try without being dependent on experts’ assistance that you can avail at the Netgear customer support number. 

Solution 1 – Download the updated Netgear drivers

You may face these kinds of difficulties due to the corrupt driver’s files or outdated drivers. So, if you have, then try to update the wireless driver software.  Sometimes, it can’t be installed automatically; thus you just require doing the following:

1. Download the updated version of the software and install them.
2. Launch ‘Device Manager.’ To do so, press the Windows Key + X and then select it from the menu.
3. Once the Device Manager appears, find your Netgear adapter and right-click it and then select the ‘Update Driver.’
4. Select the ‘Browse my computer for driver software,’ followed by the ‘Let me pick from device drivers list on my computer,’ and then click the ‘I have disk’ option. 
5. Next, find the driver; you may save the file either on the desktop or the disk drives.  Select the .inf file and click ‘OK. ’

Additionally, you can choose the driver software via the device drivers list on your PC. Here’s how to do:

1. At first, follow the first of 4 steps as same as the described above, and then click uncheck the ‘Show Compatible Hardware’ option.
2. Select the manufacturer as Netgear from the left submenu, and then choose the adapter model from the right sub menu.
3. Click ‘Next’ when you get Update Driver prompt. Click ‘Yes.’ Now restart your PC and check if the problem is fixed. 

However, you should try to download the driver software manually. Thus, you can prevent file loss and even damage to your computer.

Solution 2 – Delete the installed adapter drivers and scan for new device

Sometimes, one of the finest solutions is to utilize the default drivers. In doing so, you should first uninstall the drivers installed on the PC. 

1. Open the Device Manager, and locate the problematic Netgear adapter, and then right click on it. 
2. Select the ‘Uninstall Driver’ option to remove the driver, and then click ‘Scan for new hardware’ once you have removed them. 

Now, when the scan is finished, the default adapter drivers should be installed automatically.

Solution 3 – Check your Firewall Security and Disable Block Internet Connection Sharing Options

Some anti-virus programs like BitDefender has its own firewall that can cause problems at times. If you aren't able to connect to the Internet with the Firewall security, then you can disable it temporarily. You may also face internet connection issues due to the Bitdefender’s Block Internet Connection Sharing option, so it’s highly suggested that turn it off also to fix the problem.  

Other Considerations – If you still won’t able to connect to the internet using your Netgear wireless adapter, then you can call at the Netgear router phone number to get the aid of experts for troubleshooting the network connection issues.