5 Easy Fixes For Limited Connection Problems With TP-Link Routers

TP-link routers can be used for both wireless and wired internet connectivity in your home and office. Many computers, laptops, tablets and mobile phones can share the one network connection. However, users may experience problems at times while they use their TP-link routers for wireless bridging, such as no Internet connection, limited connectivity, not being able to access the Internet or your router turning off unexpected. In most situations, a bit of troubleshooting with the help of experts at TP-link support phone number, can get your wireless router back up and work. Here’s how to fix:

Causes and Solutions:

Solution #1: The Internet connection can be disconnected from the AP or modem due to the ISP issues. If you see the ‘Limited’ or ‘No Connection’ issues, then first check whether you’re connected directly or via the TP-Link router. Wait for a while to see if the connection returns back on its own. If it doesn’t, then restart the modem and try again to fix the problem. However, if the issue still continues, contact your ISP.  If you can access the Internet with AP/Modem, then you should try to troubleshoot your router for issues.

Solution #2: If your TP-Link router is connected via LAN, check that the cables are attached correctly, and connections aren’t broken or loose. If you have a Wireless WAN connection, ensure that the router is put in a place where it’s getting adequate signals. If it’s not, then you may not be able to access the Internet. So change your router’s location and try again to connect. 

Solution #3: If you’re using your TP-Link router for Wi-Fi bridging, check that you have used the same password and channel as an Access Point or your modem.  Using a different channel number or password will result in a limited connectivity or no connection issue. So, check the Repeater/WDS bridge configuration and make sure that these two have similar ones with the Access Point or Wi-Fi Modem settings. Using a different SSIS doesn’t matter in this circumstance. 

Solution #4: If you’re using your router as a repeater, WDS bridge, repeater or to share multiple systems over LAN and having limited or no internet connection issues, then there are possibilities that DHCP is sourcing IP conflicts and it’s failing to provide the IP address. Also, you may face such problems due to a firmware hiccup or incompatibility between associated devices. In such a situation, often, turning off DHCP solves the limited or no Internet connectivity problems. 

Solution #5: If you have done everything to fix the connection issue, and still the problem exists, there might be problems related to your device hardware. In fact, in such cases, you should contact the customer support by dialing the TP-link router customer service phone number for further assistance.

How to Show IP Routing Table on Cisco Router

Cisco routers run on their own IOS (Internetwork operating system) operating system. When configuring these routers, it’s important to have knowledge of the CLI (command line interface) to users, which includes a number of commands, depending on your router model and the user privilege level. These commands let the user perform different operations necessary for the configuration of the router and to make it secure from several vulnerabilities.

Besides, due to the proficiency of Cisco IOS, it has been copied by the other router’s manufacturers. If you want to test the routing table on your router, the process is quite easy and straightforward; still, you can acquire the support of professionals by calling at the Cisco customer support number to complete the process in a hassle-free manner. Here’s how to check: 

Setting Up Your Computer 

• First of all, connect your PC using the COM port to the router’s console port via the serial cable. 
• Open the HyperTerminal tool. If you have Windows Vista or 7, you can’t access it directly, and you need to download the tool manually. 
• Change your HyperTerminal configuration to the correct COM port, and set the connection speed up to 9600 baud.

Connecting to Cisco Router

• Start your Cisco router if it’s not yet turned on. If it prompts you to complete the initial settings, then click the ‘No’ button. 
• In the prompt window, input the word, which can be either router name or the model of the router. Also, you need to enter the password in the enable mode. Enter the password if it’s necessary. The CLI will change the router settings and set it to the enable mode. 
• Enter the ‘show IP route’ text in the command line window. It will now display the IP routing table.

However, if you are not familiar with the router functionality and don’t know how to use the Cisco router to show IP routing table, then you can call at the Cisco router tech support phone number to get the guidance of technical specialists. Additionally, you can also verify the Cisco IP routing table to troubleshoot the related problems. Whatever problems you have with your router, just call on the same number for identifying and remediation problems.

Netgear wireless adapter not working with Windows 10

Some Windows 10 users still have reported that they won’t be able to connect to the Internet using the Netgear wireless adapter. Although the adapter functions well while starting the PC and connecting it to the Internet, but after some time the internet drops down frequently and the only method to access it is to disconnect and reconnect the adapter. Such situation can be quite frustrating and can disrupt your work as you’re left with the unstable network connection; however, there are few things you can try without being dependent on experts’ assistance that you can avail at the Netgear customer support number. 

Solution 1 – Download the updated Netgear drivers

You may face these kinds of difficulties due to the corrupt driver’s files or outdated drivers. So, if you have, then try to update the wireless driver software.  Sometimes, it can’t be installed automatically; thus you just require doing the following:

1. Download the updated version of the software and install them.
2. Launch ‘Device Manager.’ To do so, press the Windows Key + X and then select it from the menu.
3. Once the Device Manager appears, find your Netgear adapter and right-click it and then select the ‘Update Driver.’
4. Select the ‘Browse my computer for driver software,’ followed by the ‘Let me pick from device drivers list on my computer,’ and then click the ‘I have disk’ option. 
5. Next, find the driver; you may save the file either on the desktop or the disk drives.  Select the .inf file and click ‘OK. ’

Additionally, you can choose the driver software via the device drivers list on your PC. Here’s how to do:

1. At first, follow the first of 4 steps as same as the described above, and then click uncheck the ‘Show Compatible Hardware’ option.
2. Select the manufacturer as Netgear from the left submenu, and then choose the adapter model from the right sub menu.
3. Click ‘Next’ when you get Update Driver prompt. Click ‘Yes.’ Now restart your PC and check if the problem is fixed. 

However, you should try to download the driver software manually. Thus, you can prevent file loss and even damage to your computer.

Solution 2 – Delete the installed adapter drivers and scan for new device

Sometimes, one of the finest solutions is to utilize the default drivers. In doing so, you should first uninstall the drivers installed on the PC. 

1. Open the Device Manager, and locate the problematic Netgear adapter, and then right click on it. 
2. Select the ‘Uninstall Driver’ option to remove the driver, and then click ‘Scan for new hardware’ once you have removed them. 

Now, when the scan is finished, the default adapter drivers should be installed automatically.

Solution 3 – Check your Firewall Security and Disable Block Internet Connection Sharing Options

Some anti-virus programs like BitDefender has its own firewall that can cause problems at times. If you aren't able to connect to the Internet with the Firewall security, then you can disable it temporarily. You may also face internet connection issues due to the Bitdefender’s Block Internet Connection Sharing option, so it’s highly suggested that turn it off also to fix the problem.  

Other Considerations – If you still won’t able to connect to the internet using your Netgear wireless adapter, then you can call at the Netgear router phone number to get the aid of experts for troubleshooting the network connection issues.  

How To Connect A Cisco Router with A TP-Link Wireless Adapter

One of the advantages of set network principles, like as the wireless network protocol 802.11, is that products developed by various companies can be used in combination with each other. If you’re using both the Cisco router and the TP-Link wireless adapter, you have no need to fear about connection problems. Nevertheless of the manufacturer, if you are within range of your wireless router, you will be able to connect any wireless adapter to it without any problems. However, if you find any difficulties in connecting to the Internet, you can contact the Cisco customer service number to get the issues fixed. 

1. First of all, insert the driver installation disc that comes with the TP-Link wireless adapter into your system’s optical drive and click ‘install’ to start the process. Follow the instructions and, once prompted, connect the adapter to an available USB port on the computer. 
2. Eject the disc from the disk drive and click ‘TP-Link Wireless Manager’ in the tray of equipment area of the operating system taskbar. Select the ‘View Wireless Networks’ option in the context menu. 
3. Choose your Cisco router’s network name from the networks list within the range and click the ‘Connect’ button. Once asked, enter the network password into the box to connect to the Cisco router. 

If you're trying to connect to a previously used Cisco router, you will need to reset the router to its original state. However, if you find any problems while resetting your Cisco router, just call at the Cisco customer support number listed on the Contactforhelp directory site and seek the assistance of skilled technicians to fix all sorts of the router and related networking issues.

How To Setup the Guest Access Feature Using Cisco Router

The network feature or guest access to many routers lets you create a distinct wireless network for users, allowing your customers and clients to obtain online without telling them your regular wireless network password or allowing unsecured computers to connect to your office network. With the compatible Cisco routers, you can set up guest access feature via the web setup page of the Cisco. Although, settings and features related to the guest access differ from model to model, so if you have any concerns regarding your router or how can you bypass the Cisco connect guest password, then you can contact the Cisco customer service to get the necessary help. 

Features

Numerous guest network features differ by the router, but all of them support guest access to let you create a distinct wireless network for your visitors or customers.  With the Cisco router, you can provide a custom name to the network, different from your internal network, as well as protect it using various kinds of wireless security. Cisco router also lets you limit the number of coexisting users on the guest network. 

Use Cases

Setting up a guest access to a company lets clients, visitors or office employees to get connected to the Internet even if keeping your regular wireless network password hidden. You can set up a different password for the guests and prevent them from accessing the company information on the same network. For example, if you are running a hotel, cafe, or restaurant, you can set your guest Wi-Fi access up to let the visitors access the internet whereas keeping your computers on a safer and encrypted Internet connection.

Setup Cisco Guest Access

To set up Guest access feature on the Cisco router, you first need to go to the router configuration page via the 192.168.1.1 and then try to login the page by entering the username and password. Open the ‘Wireless’ section and click the ‘Guest access.’ Set the ‘Allow Guest Access’ option and then click the ‘Yes.’ Subsequently, press the ‘Change’ and provide a password for the guest network. Choose how many existing visitors you want to permit, and then press ‘Change.’ By using the Cisco Connect software, you can also change your router settings. 

Other Considerations 

The steps in this tutorial apply to almost all brands of routers, but may differ on the specific model. In order to know the exact procedures on setting up guest access, you can consult to the certified technicians at Cisco customer care. 

How Do I Set Up a Wireless Netgear Connection to My Laptop

The best gain of using a wireless connection in your office or home is the ability to connect multiple network-based devices to the high-speed Internet connection through one single connection. Additionally, you can avoid the annoyance of Ethernet cables and make a cleaner work environment. Netgear router is one of the most widely used wireless routers available for both personal and professional use, and you can configure it easily on your laptop or desktop PC that has a wireless adapter. 

Once you setup and configure Netgear router setting on the laptop, you will be able to connect your laptop and wireless device to the network. A Netgear wireless-N router can help you add flexibility to the local area network of your company. However, if you face any difficulties while configuring the router, you can seek quick help from the Netgear customer care. Take a look at the steps:

1. Turn off your laptop while connecting to the wireless network. Unplug your modem and eliminate the Ethernet cable that is currently connected to the laptop. 
2. Attach the cable one end to the port on the modem and then insert the other end into the available port on the Netgear router.
3.  Plug the second Ethernet cable one end into any of the available ports on the router back side and then connect the other end of the Ethernet cable into the port on the laptop.
4. Connect the mini-end of the Netgear power adapter into the router and plug the adapter into the power plug. Wait for the LED lights to show on the router front side. Check the router status. The port number revealed on the router front side should be stably lit and matched with the added port you applied to connect the laptop. 
5. Start your laptop and open the web browser to configure the Netgear router’s settings, and then enter the ‘192.168.1.1’ in the address bar of your browser and press the ‘Enter’ key. 
6. Enter the ‘admin’ in the User Name box and then type the ‘password’ in the Password box. Click the ‘OK’ to go the setup page of your router. 
7. Click on the ‘Setup Wizard’ tab on the left side of the window. Click the ‘Yes’ button to allow your router to configure the network connection it identifies automatically.
8.  Click on the ‘Apply’ button to save the settings of your Netgear router and connect to the Internet.

Now, you can connect your device to the high-speed connection and browse the Internet. But before beginning the installation process, firstly you need to know the IP address you get from the ISP. However, if you are facing problems in connecting to the Internet, you can ask the help of the skilled professionals at the Netgear customer care number and seek easy resolution. 

TP-Link TL-WR740N 150 Mbps Wireless N Router is an able switch gadget for your workplaces and homes that not just upgrade the pace of system availability to your sought range, but additionally it also arrives in a smooth mode outline that supplements your space. The joined wired or remote system interfacing gadget has been coordinated with a web sharing router, helping you to make your own Local range Network.

 Apart from being a budget friendly device, the process TP Link Wireless Router setup is also quite friendly and easy-to-use. Well, it is still advisable to know all the pros and cons of it before you get started with the same. And so, here we have come up with a quick review of TP-Link TL-WR740N 150 Mbps Wireless N Router, you can take a look:

Speed Range 

The remote switch from TP Link underpins 802.11n innovation; giving 802.11n execution up to 150Mbps velocity network. Get and appreciate best Internet experience while you are downloading, gushing, gaming or utilizing whatever other lightweight or overwhelming applications that you wish to use without bothers with this marked remote switch. 

Execution 

Get consistent and subjective execution while voyaging information over extensive separations, physical obstructions, little houses, workplaces, and condo and get amazing change in your remote system execution. The fast remote switch accompanies a Clear Channel Assessment that implies you get blockage and struggle free channel determination highlight while exchanging mass or substantial information and requesting speed. 

Remote Performance 

You get fantastic capacity to moderate your information misfortunes while exchanging them over long separations and through deterrents while in vast condo, little office, building, or region. TP-Link TL-WR740N 150 Mbps Wireless N Router is likewise self-perfect with Wi-Fi ensured set ups furthermore includes Quick Security Setup which permits the client to in a split second include security just by squeezing the giving QSS catch. Set up a protected association and keep your information safe from breaks and burglary with secure switch. 

Advanced Benefits 

The remote switch brings the accommodation of picking the greatest transmission capacity furthermore permits the client to pick data transfer capacity over clogs. The simple to setup remote switch accompanies bother free establishments and setup methodology, helping clients to get faster availability. 

TP Link is a main name for switches, access focuses and other system related gadgets. The firm exceeds expectations in building up the items that agree to quality principles and usefulness according to request. You can purchase different systems administration gadgets and TP Link different items structure and get substantial rebates on each of your buy.

Specifications: 

• 3 Year Warranty

• Brand: TP-Link

• Model Number: TL-WR740N

• Features: 150Mbps wireless data rates ideal for video streaming, online gaming and internet calling

• Wireless security encryption easily at a push of WPS button

• IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC

• WDS wireless bridge provides seamless bridging to expand your wireless network

After you came to know all about the router, if you want to get started with it, just make sure that you have called at TP Link Wireless Customer care number. Well, if you don’t have the number, it is advisable to you to visit the site of Contactforhelp as it is an online directory, you can easily avail the original and reliable numbers for all the Canada and the US-based customer services. 

How to Secure TP-Link Router Device from Possible Conflicts

Is your TP-link router is infected to the malfunctions and online threats? Is your wireless connection dropping out unexpectedly on the TP-Link router? What can you do if the TP-Link router is not running properly or if the wireless network is unstable or flashing frequently? Don’t be panic! There are some situations when your router is infected with the online threats that may be the reason of the poor network connection.

In order to make TP-Link router device secure, it is suggested to go through the following guide and check the settings manually to look for the possible vulnerabilities and system attack.  In such a situation, you can also ask for the assistance of the TP-link Wireless Router support service and seek indeed help. Here’s know how to do:

1. At first, ensure that you have anti-virus software installed on your system. If you use, then activate the anti-phishing function of the web browser to avoid malicious links and websites. 
2. If you are operating a Wi-Fi router. Replace the default wireless password to the new one to ensure that any unauthorized user can’t get access to your Wi-Fi network.
3. Also, change the default username and password of your TP-Link router by entering the new one that you can remember easily. If you suppose that you will forget it, then note down the password on the paper. You should use at least 8 characters of password including letters, special symbols to make it secure. 
4. Once you make a successful login to the router web page, your web browser will ask you to remember the router’s username and password; here you have no need to allow it. Also, check that you have closed the browser window once you complete the router configuration process. 
5. Don’t try to use its ‘remote management’ unless you certainly need it. 

In order to prevent the possible virus attack, you can also set the firewall security using the trusted antivirus packages. However, if all other devices are having the smooth wireless connection, but some of the individual devices are suffering from the irregular wireless internet connectivity, then there is the possibility that your device is not functioning well.

If you are still stuck to access internet due to vulnerabilities or threats, contacting the TP-link support phone number is the best alternative you can prefer to find the exact solutions related to your query. 

Getting to Know How to Turn on FTP on Cisco Routers

If the times come talk to about features and capabilities, Cisco router is a renowned name transmits highly secure networking data, based on adaptive and open technologies. This brand router is helpful to make simpler your business networking setup and make a smooth and secure connection between the Internet and your local area network (LAN). In addition, to serve as a basic gateway to the Internet, it also works as an FTP server. When the server is turned on, you will be able to transfer files on the router directly whether you are connected to the LAN side via an FTP client or connected via a terminal.

 However, if you are having any concerns or problems related to the router functionality, contact directly to the expert by dialing Cisco customer service number for further solutions. The following below-listed steps will let you how to activate the FTP (File Transfer Protocol) on the Cisco Router. Here’s know how to do:

    Step 1: Connect to the Cisco router via a Telnet client. Enter the IP address of the Cisco router like     as the host name for the Telnet network connection, then click on the client ‘Connect’ button. You       can also navigate to the router’s documentation to find the address.

   Step 2: Enter your router’s password once asked to do so in order to complete the connection setup,    and get access to the router’s controls along with the terminal program.

   Step 3: Enter the ‘ftp-server enable’ on the terminal’s command line, and then press the ‘Enter’ key    to activate server capability.

  Step 4: Enter the ‘ftp-server top dir <directory>’ on the next terminal route, exchanging the            directory name for the FTP files on behalf of <directory> to bound FTP access to that particular      directory only.

  Step 5: It will stop unauthorized access to your network or the router. Press the ‘Enter’ key to put     the command into your router. 

Now, you will be able to access to the secured network connection and transfer your files under the supervision of FTP server. However, if you might face any problem when you turn on FTP on your router, contacting the Cisco tech support phone number is a good solution you can avail to fix the FTP issue instantly related to the Cisco router, or other technical problems.